Call Us : +971 4 331 0000

NOISE S.T.O.P. FABRISORB™

Decorative Fabric Wrapped Custom Acoustical Wall Panels

  1. High Performance
  2. Architecturally Decorative
  3. Custom Engineered & Manufactured
  4. Reduced Noise & Reverberation
  5. 100% Custom Colors and Sizes
Product Photos

Product Specs
Material 6 lb. density glass fiber with woven fabric and micro-perforated vinyl facings.
Pattern Flat-faced with square or radiused corners, beveled, radiused or mitered edges.
Features Custom designed and manufactured to meet every need. Flat or curved panels. Soft or hard edges
Applications Offices, schools, meeting rooms, music rooms, hotels, auditoriums, recording studios, broadcasting studios. Any space where good speech privacy or speech intelligibility is important.
Thickness 1″, 1-1/8″, 2″, 2-1/8″
Size Custom Up to 4′ × 10′
Colors A wide range of standard colors and custom colors are available for woven fabrics and perforated vinyls.
Flammability ASTM E84, Class A. Flame Spread: 15; Smoke Developed: 40
Color Adhesive, Hook & Loop Fasteners, Mechanical Clips, Impaling Clips, magnetic clips.

Note: If using E.C. clips to mount these panels to the ceiling, the installer must use construction adhesive on each clip so the clips do not slide apart. It is also advised to toe-nail the panel into place, or use trim around the perimeter to make sure that the clips adhere together correctly.

Custom Graphic Options

High performance absorption.

Absorptive in high traffic areas.

For combined use in Studios for absorption and reflection.

Multi-purpose panel for absorption and sound blocking

For gymnasiums, absorption and abuse resistance.

For long lasting and effective tackability.

High absorption and tackability

Tackability where sound absorption is not necessary.

Barricade vinyl barrier, ideal for areas requiring high STC.

Fabrisorb™ Wall panel – Sound Absorption Coefficients
6-7 PCF Glass Fiber 125Hz 250Hz 500Hz 1KHz 2KHz 4KHz NRC
1″ .14 .27 .80 1.11 1.14 1.14 .85
2″ .22 .81 1.24 1.30 1.21 1.16 1.15
Edge Details

Impaling Clips and Adhesive
One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Impaling Clip
Install Location Wall
Parts Included (1) × Impaling Clip
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part Number HWIMP33
Fabric Wrapped Panel Hardware Pack – Impaling Clip
One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Impaling Clip
Install Location Wall
Parts Included> (1) × Impaling Clip
(2) × Drywall Anchors
(2) × ¾″ Screws
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part Number HWFWPIMP
Fabric Wrapped Panel Hardware Pack 1
One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.
Impaling Clip
Install Location Wall or Ceiling
Parts Included (1) × Mounting Plate (factory-installed on the back of the panel)
(2) × 3″ Plastic Z-bars
(2) × Drywall Anchors
(4) × ¾″ Screws
Part Number HWFWPHP1
Note Plastic clips are also available in 21″, 47″, and 96″ lengths.
Fabric Wrapped Panel Rotofast Standard Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.
Impaling Clip
Install Location Wall
Parts Included (1) × Rotofast standard anchor
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast standard hex tool
(1) Rotofast standard driver tool
Note Multiple kits ordered together will only include (1) Rotofast standard hex tool and (1) Rotofast standard driver tool.
Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.
Impaling Clip
Install Location Wall or Ceiling
Parts Included (1) × Rotofast snap-on anchor with ratchet
(1) × Marking plug
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast Snap-On Hex Tool
Note Multiple kits ordered together will only include (1) Rotofast Snap-On Hex Tool and up to (6) Marking plugs.